OUR ENGINES / STANDARD LINE

ML1000

The ML3000 and ML1000 engines are ready to be used for domestic and/or industrial applications, CE marked and under warranty of the manufacturer (beyond terms and conditions described in this catalog and in the official documentation).

Material used
  • Engine block and crankcase: Fe510 nickel-plated
  • Piston Rod: 7075 aluminium alloy
  • Crankshaft: steel bar quenched and rectified
  • Connecting Rods and pistons:7075 aluminium alloy anodized
  • Cylinder sleeves:chrome-plated steel
  • Piston gasket:Teflon/carbon
  • Heat exchanger and Cooler: Steel AISI 310
  • Regenerator: Steel AISI 310
Main features
  • CC: 522
  • Gas used:Nitrogen
  • Overpressure: Up to 30 Bar
  • Working temperature: 850°/950° Celsius (Hot side)
  • Starting temperature: 700° Celsius (Hot side)
  • Rotation per minute: (with load) up to 750
  • Lubrication: not needed
  • Cooling: water (from 4,5 up to 6,5 Liter per minute)
  • Dimensions (approximated): 959 mm x 780 mm x 266 mm
  • Weight (approximated): 110Kg
  • Hot exchanger dimensions: 120 mm x ø 198 mm
Electric generator
  • Power: 6 Hp continuous, 19 peak Hp
  • Voltage: 24-48V DC
  • Maximum RPM: 5000
  • Torque Constant: 1.20" lbs/amp.
  • Peak Stall Torque: 38 Nm.
  • Max Motor Current: 300 A/1min.
Start and controll unit
Start system and battery pack (48V- 12Ah). Automatic start with termocouple to be fitted into the combustion chamber and security system for the presence of the refrigerant fluid. Monitoring of the main parameters of the engine by wireless (o mobile).
Standard electrical outlets
  • Off-grid: 230-115 Vac 50-60 Hz.
  • In–grid: DC standard for certificated inverters.
Perfomances
  • Electric power generated: up to 1,1 kW.
  • It can run constantly, 24 / 7.
  • Electrical efficency: 14%
  • Hot water production :kWt 10,00 • 6.5 lt/minute a 40° Celsius (temp water IN 15°Celsius).
Motore ML1000

APPROXIMATE DIMENSIONS ML3000

Engine ML1000
Engine ML1000
WATCH THE VIDEO